A Pearce water damage inspection isn't a walk-through with a flashlight. It's a systematic, instrument-driven assessment that produces a written report showing exactly where the water went, how saturated each affected assembly is, and what needs to happen next.
Here's what makes our Pearce inspection service more than a visual walk-through.
FLIR infrared thermal cameras detect temperature differentials in structural surfaces — a wet wall cavity cools differently than a dry one during evaporation, making moisture migration visible as a thermal signature even behind intact drywall. Our Pearce inspection team uses thermal imaging as the primary tool for tracing water migration paths through wall systems, subfloor assemblies, and ceiling cavities, identifying affected areas before a single pin is driven into a wall.
Thermal imaging shows probable moisture — calibrated moisture meters confirm it. Our Pearce inspectors use both pin-type meters (direct reading in framing and structural members) and non-penetrating radio-frequency meters (surface reading through drywall and flooring) to take quantified moisture content readings at all thermal-identified locations. These readings are recorded at labeled sensor points and become the data basis for the written inspection report.
Every COS Water Damage Restoration Pearce water damage inspection produces a written report: affected area descriptions, thermal images with annotations, moisture meter readings at labeled sensor points, water category determination (Cat 1/2/3), and a recommended scope of work with priority sequencing. Reports are formatted to be useful to your insurance carrier, a remediation contractor, or a real estate transaction where water damage disclosure is at issue.
Our Pearce inspection service covers two distinct use cases that require slightly different approaches: pre-remediation inspection (mapping an active or recent water event for claim documentation and remediation scoping) and pre-purchase or post-remediation verification inspection (confirming whether previous water damage was properly remediated or whether current conditions indicate an ongoing or previous water problem). Both use the same instrument suite and produce the same written report format, but the findings are interpreted differently for each use case.
COS Water Damage Restoration's Pearce inspection team covers every structural assembly type, every common water migration path, and every inspection use case encountered in residential and commercial water damage situations in AZ.
Active event inspection is the step that prevents under-scoped remediation and missed hidden damage.
Real estate transactions in Pearce frequently involve properties with prior water events — disclosed and undisclosed. Our pre-purchase inspection uses thermal imaging and moisture meters to identify active moisture in structural assemblies, staining patterns consistent with prior water intrusion, and the condition of previous remediation. For Pearce buyers, this inspection provides either confidence that a disclosed water event was properly handled, or documentation that it was not — giving the buyer negotiating leverage and a clear picture of what additional remediation cost, if any, is warranted.
Post-remediation verification is an independent assessment — not a rubber stamp.
Mold risk assessment in Pearce is distinct from air quality testing. We assess structural conditions and visible evidence — not air samples.
Below-grade moisture in Pearce properties is underdetected and underlies a significant portion of structural issues discovered later.
When an insurance carrier requests additional documentation for a water damage claim — or when a claim has been disputed based on damage scope — our Pearce insurance documentation inspection provides the instrument-backed evidence that supports the remediation scope. Thermal images with annotations, moisture meter readings at labeled sensor points, water category determination, and written assessment of the connection between the reported event and the documented damage create a claim file that can withstand adjuster scrutiny.


Same-day scheduling available for active water events. Pre-purchase inspections booked on your transaction timeline.
Our Pearce inspector arrives with FLIR thermal camera, calibrated pin-type and non-penetrating moisture meters, and inspection documentation tools. The inspection begins with a thermal pass of all suspected affected areas, followed by direct meter readings at all thermally identified locations. Each reading is recorded at a labeled sensor point location on the floor plan.
After the on-site assessment, your Pearce inspector reviews the key findings with you — which areas are affected, what the readings indicate, what water category applies, and what remediation is indicated. If you have questions about specific readings or want to understand what a particular finding means, this is the conversation for it. The verbal review happens on-site.
The written inspection report — thermal images with annotations, sensor point readings mapped to a floor plan, water category determination, and recommended scope — is delivered within 24-48 hours of the on-site session, formatted for insurance, remediation, or real estate use as appropriate to your situation. We're available to answer adjuster or real estate agent questions about the findings.



"The thermal imaging session was what sold me on how a proper Pearce water damage inspection should work. Our inspector traced water migration I never could have guessed at — the event in the utility room had spread moisture into the adjacent storage room wall framing more than twelve feet away. The written report documented all of it and our remediation contractor used it directly to scope the drying project."
"I had noticed a musty smell in a room of my Pearce home for months before calling COS Water Damage Restoration. Their inspection found active moisture in the subfloor assembly under an area rug — a slow pipe drip that had been going on long enough to saturate the subfloor significantly without any visible surface evidence. The written report documented the moisture readings, the thermal images showing the extent of the affected area, and the recommended scope. I would never have found this without the thermal camera."
"The post-remediation verification inspection is what I most value. After our last Pearce property water event, the remediation contractor signed off on completion. We had COS Water Damage Restoration do a verification inspection and found one wall section with framing still above 15% moisture content. That section would have been a mold problem within weeks. The verification inspection caught it before it became our problem."
COS Water Damage Restoration's certified inspection team serves Pearce and surrounding communities throughout AZ. Call +1-844-499-0972 to schedule your Pearce inspection.
Visible water damage is easy to find. The moisture behind your walls and under your floors is what causes the mold problem three months later. Call +1-844-499-0972 and our Pearce inspection team brings the instruments to find all of it.
📞 Call +1-844-499-0972 — Schedule Pearce InspectionIICRC Certified · FLIR Thermal Imaging · Written Reports · Pearce, AZ